Built to Run. Rated to Prove It.
Continuous-duty air compression for plant floors, hospital networks, and OEM skid packages. 87,000-hour MTBF. Field-verified. No fine print.
Mean time between failure across 2,400 field units over a 14-year service record. The ISO 1217 industry benchmark sits at 52,000 hours. Our units run 67% longer between scheduled interventions — a direct reduction in unplanned downtime costs averaging $4,200 per incident for mid-size plants.
MTBF Comparison — Hours
CF-Series Rotary Screw
Asymmetric rotor profile. Ceramic-coated thrust bearings. Rated 7–13 bar.
"We spec'd the CF-460 after our Atlas failed mid-shift. It's been running continuous for 19 months without a single unplanned stop."
— Marcus Webb, Plant Manager · Galveston Petrochemical
Seen enough to shortlist us?
Configure pressure range, CFM, and duty cycle. Get a quote in 4 minutes.
Specific energy at 7 bar. Measured. Not estimated.
At 7 bar rated pressure, the CF-Series draws 4.2 kW per 100 CFM of free air delivery. The ISO 1217 Annex C market average across oil-injected rotary screw units sits at 5.8 kW. Across a typical 8,000-hour operating year, that gap returns $21,400 in electricity costs at $0.135/kWh — before maintenance savings.
Thermal imaging across 180 production units confirms uniform heat distribution. No hot-spot signatures above 78°C at ambient 40°C. Oil temperature stability ±3°C across the full load range.
Specific Energy Consumption — kW per 100 CFM @ 7 bar
Source: ISO 1217 Annex C third-party testing, 2024. Lower is better.
Performance Data Sheet — CF-460 @ Full Load
Thermal Imaging — Field Unit #CF-1847
Max surface temp 71°C at 40°C ambient. No anomalous heat signatures.
Annual Electricity Savings
$21,400
vs. Market Avg
−28%
Ready to run your numbers?
Enter your operating hours and pressure requirement. We'll calculate your exact annual savings.
Bolts into your skid package. No redesign required.
340 OEM installations across packaging machinery, medical gas systems, and industrial automation skids. The CF-Series was designed from the frame up to integrate — not to be integrated around. Every external interface is documented to IEC 60034 standards with 3D CAD files available on request.
Drop-in Skid Compatibility
Standard mounting centers match PNEUROP 6611 skid templates. No custom adapter plates. If your skid was designed for a major OEM, the CF-Series bolts in.
Native Protocol Support
Modbus RTU ships standard. CANopen, PROFIBUS-DP, and EtherNet/IP available as factory-installed modules. No third-party gateway required for PLC integration.
Staged-Delivery Program
For OEM integrators building to schedule: we hold finished units in temperature-controlled storage up to 90 days, releasing against your production call-off. No carrying cost, no line stoppages.
Mechanical Interface — CF-460 Series
Footprint (CF-460)
1,420 × 740 mm
NEMA 4X cabinet
Inlet / Outlet
DN 50 / DN 40
PN16 flanged
Power Supply
380–480 V, 3Ø
50/60 Hz
Control Interface
Modbus RTU / TCP
CANopen optional
Cooling
Air-cooled std.
Water-cooled on order
Mounting
ISO 1217 base
4-point anti-vibe
Control Protocols
Field Installation — Tulsa, OK
CF-460 × 3 in parallel. 2,400 CFM @ 8.5 bar. Commissioned in 11 hours.
"CAD files matched reality. Bolt pattern was exact. We dropped the unit in, connected Modbus, and had it talking to our SCADA in under two hours. First time that's happened with any compressor vendor."
— Priya Nair, Systems Integration Engineer · Midland Automation
Need to verify fit before you commit?
Request 3D CAD files, dimensional drawings, and interface documentation — no NDA required.
Saved over 5 years versus the market average. Before you negotiate price.
Capital cost is one line in a capex justification. The other four years of energy and maintenance costs are where the real decision lives. The CF-Series carries a higher list price than two of the five major OEM alternatives — and a lower 5-year TCO than all of them.
5-Year TCO Breakdown — CF-460, 8,000 hrs/yr
Electricity rate $0.135/kWh (US industrial average, EIA 2025). Maintenance per OEM schedule.
Still Comparing?
Download the Full Technical Spec Sheet
43-page document covering all CF-Series models. Dimensional drawings, performance curves, electrical schematics, and BOM-level parts data. Everything you need to complete a bid comparison.
Ready to Specify
You've seen the numbers. Now run yours.
Enter your pressure requirement, flow rate, duty cycle, and operating hours. The configurator returns a matched model, energy cost projection, and a factory-direct quote. Four minutes. No rep required.